Engineers - Principal/ Staff/ Associate Staff
- Kuching, Sarawak
- Tetap
- Sepenuh masa
- Requirement as per below technical competency
- Enclosed example of JD template for your reference
- Participating in development project with RD Engr and to set-up unit process recipe on available tools / BKM recipe / process flow to meet development success criteria.
- Participating in continuous improvement activities (Defect improvement, Process stability)
- Oversee overall yield improvement activities with the module and YE.
- Work with process engineers on process running condition ( DOE ) versus tool capability.
- Able to communicate well between Module and YE / RD / QA / Etc
- Able to work with YE / RD / CP to develop COT+ / CUSP process flow
- To set-up new process recipe, provide recommendation and integration guidelines to RD Engr and module PE for new development project.
- Coordinate new process or new technology evaluation/discussion between module and YE & R/D Engr.
- To identify process limitations, assess process manufacturability and process integration margin on existing tool for new development.
- Able to Pre review and define COT+ / CUSP before start evaluation.
- Capable to design the DOE to solve the in line / PCM / Sort issue
- Utilize Best Know method (BKM) recipe and process flow for the production.
- Reduce unnecessary process step for the production.
- Task Force Team (TFT) participation or involve PSM to solve or improve current production issue.
- Facilitate engineers for problem solving through DOE
- Qualification: Bachelor Science/ Degree/ Masters / Dr in any Engineering related field
- Experience: Experience in semiconductor to enable the job holder to deal with a wide variety of problems (
- Skills/Competencies: The job holder will be accepted as a technical expert in his own field who is fully competent to handle both routine and non-routine matters.
- Wafer Fab process recipe set-up experience and hands-on skill set below for each headcount:
- Experience with AMAT VIISTAs & Purion Xe Ion Implanters preferable.
- Good knowledge with CMOS processes and unit process development experience will be added advantage
- Experience in Silicon Oxide, Silicon Nitride, and Si/Poly-Si etch process.
- Familiar with AMAT Centura Super-e, AMAT Centura DPS R1 (Poly), AMAT Centura DPS+ (Poly) platform.
- Experience in SiGe etch will be a surplus.
- Experience in Silicon Nitride, Silicon oxide and Poly wet etch process and wet cleaning process
- Familiar with various wetbench tool type including dipping (DNS/Kaijo), spray (FSI) and backside film removal tool
- Experience in Furnace Deposition process, Silicon Nitride, Polysilicon and Oxidation process. Hands on skill like recipe set-up and process tuning is important.
- Familiar and process hands on experience with Applied Material HDP CVD process / PECVD process on Producer/ Novellus for recipe set-up and fine tuning.
- Familiar and process hands on experience with Applied Material Endura Sputtering System for PVD for recipe set-up and fine tuning.
- Involved in continuous improvement project, process recipe optimization and development.
- Experience with New module setup and qualification
- Hands on experience with Nikon stepper/scanner and Tel Track Act-8. Including recipe creation, stepper job creation.
- Familiar with 0.11um technology node design rule and KrF RET
- Thin Films
- Wet Etching
- CMOS
- Stepper
- Photolithography
- Sputtering
- Plasma-Enhanced Chemical Vapor Deposition (PECVD)
- Dry Etching
- Chemical Vapor Deposition (CVD)
- Polysilicon